Adjusting The Throttle Cable; Fitting The Harness - Stihl BR 500 Manual De Instrucciones

Fitting the Transport Aid
When storing or transporting the
machine:
: Secure the velcro strip to the blower
tube – pull the flap through the
buckle.
: Attach blower tube to handle
opening in the backplate.
BR 500, BR 550, BR 600

Adjusting the Throttle Cable

It may be necessary to correct the
adjustment of the throttle cable after
assembling the blower or after a
prolonged period of operation.
Adjust the throttle cable only when
the machine is completely and
properly assembled.
: Move the throttle trigger to the full
throttle position – as far as stop.
: Turn the screw in the throttle trigger
slowly clockwise until you feel initial
resistance.
English / USA

Fitting the Harness

: Adjust the harness straps so that
the backplate is held firmly and
comfortably against your back.
A = Adjust height
B = Adjust angle
15