Adjusting The Throttle Cable; Fitting The Harness - Stihl BR 350 Manual De Instrucciones

Secure the velcro strip to the blower
N
tube – pull the flap through the
buckle.
Secure the blower tube to the
N
handle on the backplate.
BR 350, BR 430
Adjusting the Throttle
Cable
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
Set throttle trigger to the full throttle
N
position – as far as stop.
Carefully rotate the screw in the
N
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another full turn.

Fitting the Harness

Adjusting the Harness
Pull the ends of the straps
N
downwards to tighten the harness.
Loosening the Harness
Lift the tabs of the sliding adjusters.
N
Adjust the harness so that the
N
backplate fits snugly and securely
against your back.
English
13