Spark Arresting Screen In Muffler - Stihl HT 100 Manual De Instrucciones

At high altitude
Turn the high speed screw (H)
N
clockwise (leaner), no further than
stop, until there is no further
noticeable increase in engine
speed.
At sea level
Turn the high speed screw (H)
N
counterclockwise (richer), no further
than stop, until there is no
noticeable increase in engine
speed.
It is possible that maximum engine
speed may be reached with the standard
setting.
HT 100, HT 101, HT 130, HT 131
Spark Arresting Screen in
Muffler
The muffler is equipped with a spark
arresting screen.
If the engine is down on power,
N
check the spark arresting screen in
the muffler.
Wait for the muffler to cool down.
N
Move the slide control to STOP-0.
N
Take out the screw (1).
N
3
2
Take out the screws (2) and remove
N
the shroud (3).
Take out the screw (4).
N
Lift the spark arresting screen (5)
N
and pull it out.
Clean the spark arresting screen. If
N
the screen is damaged or heavily
1
carbonized, fit a new one.
Refit the spark arresting screen.
N
Insert screw and tighten it down
N
firmly.
Install the shroud.
N
2
English
33