Titan 0524857B Manual Del Propietário página 5

Problem
A. Restricted air flow or no air
flow
B. Filter warning light is on
C. The turbine has no power
D. Excessive arcing/sparking in
the turbine
IMPORTaNT:
• The turbine motor can be damaged if not serviced properly. Have the brushes (Kit P/N 0277243) checked for wear by an
authorized service center every 400 hours.
• Clean filters regularly. When the filter warning light comes on, it is time to clean the filters. Clogged filters cam cause excessive
heat and possibly damage the unit.
• For additional troubleshooting information, see the manual that came with your gun.
Specifications
Air pressure ................... 9.5 psi
Power ............................ 120VAC, 60 Hz, 13.8 A
Turbine weight ............... 22.5 lbs
Main hose length ........... 30 ft
Spray gun included ........ Maxum II
Patents
These products are covered by one or more of the following U.S. patents:
5,423,395 D322,790
D365,569 5,556,255
5,772,711
Titan 30-Day Satisfaction Guarantee
If, within a 30-day period from the date of purchase, you are not totally satisfied with a TITAN unit, you may return it for full credit
toward another TITAN product of equal or greater value.
© Titan Tool Inc. All rights reserved.
Troubleshooting
cause
1. Air flow adjustment knob on the spray gun
is turned off
2. Air filters are clogged
1. Air filters are clogged
1. No power at the power supply
2. Circuit breaker has been tripped.
3. Worn turbine brushes
1. Worn turbine brushes
2. Damaged commutator
5,181,832 D338,208
5,639,222 5,702,131
Solution
1. Adjust the air flow adjustment knob
2. Clean or replace the filters
1. Clean or replace the filters
1. Check the power supply
2. Reset the breaker. If problem persists, have turbine
inspected at an authorized Titan service center.
3. Have the brushes replaced at an authorized Titan
service center
1. Have the brushes replaced at an authorized Titan
service center
2. Replace the turbine (contact a Titan service
technician)
5,174,610
5,558,492
5
5,550,336
5,573,371
English