Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Double and triple cooking zone
To turn on extension of the middle double cooking zone touch (+) or (-) to select the double
cooking zone and then touch
Operation of the cooking zone extension is indicated by a red LED indicator light above the
cooking zone display.
To turn on extensions of the front left triple cooking zone touch (+) or (-) to select the triple
cooking zone and then touch
first and second extension.
Operation of the cooking zone extensions is indicated by a red LED indicator lights above the
cooking zone display. One red LED indicator lights up when the first extension is turned on
and two red LED indicators light up when both the first and second extensions are turned on.
To turn off extensions of the front left triple cooking zone touch (+) or (-) to select the triple
cooking zone and then touch
You can only turn on extensions when a cooking zone is already in use and a
heat setting is set.
Set the heating power
When the heating power is set to "0" you can adjust the heat setting using the (+) and (–) sensors.
If you do not wish the automatic warm-up function to be activated, select the heat setting using
the (–) sensor (+) (e.g. heat setting "6", decimal point is off).
Touch (–) to gradually reduce the heat setting or touch (+) to increase the heat setting.
If, however, you do wish to cook using the automatic warm-up function, start heat setting selec-
tion by touching the (+) first (see Automatic warm-up function).
Automatic warm-up function
Each cooking zone is equipped with an automatic warm-up function. When this is activated,
then the given cooking zone is switched on at full power for a time depending on the heat set-
ting selected, and is then switched back to the heat setting originally set.
Activate the automatic warm-up function by setting the required heat setting by touching the (-)
(3) sensor first. Then the heat setting "9" is displayed intermittently on the cooking zone display
(2) with the letter "A" for around 10 seconds.
If you start to select the heat setting within 10 seconds by touching the (–)(3) sensor field, then
the automatic warm-up function is activated and the letter "A" is displayed intermittently with
the cooking zone's heat setting selected for as long as the function is activated.
The cooking heat setting can be now changed at any moment using the method described
above in the "Set the heating power" section".
38
.
once to turn on the first extension or twice to turn on both the
.
Publicidad
