Publicidad
Idiomas disponibles
Idiomas disponibles
en-us
Faults – What to Do?
Faults – What to Do?
9
WARNING
F a u l t s – W h a t t o D o ?
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only
be carried out by an authorized servicer. If the
appliance is not functioning properly, unplug the
power cord or switch off the fuse in the fuse box.
Contact Customer Support.
Malfunction
Possible cause
General electrical
The household fuse has opened.
malfunction.
The electrical
Food or cleaner residue may be between the
ignition doesn't work.
flame igniters and the burners.
The burners are wet.
The burner lids aren't correctly positioned.
Power failure
Uneven burner flame The burner parts aren't correctly positioned.
The openings of the burner are dirty.
Gas flow seems
Intermediate valves are closed.
abnormal or no gas
If using a gas cylinder, make sure it's not
comes out.
empty.
It smells like gas in
Potential leak on connection of gas cylinder.
the kitchen.
The burner
You haven't held the control knob long enough. After the burner has ignited, continue pressing
immediately goes out
after ignition.
The openings of the burner are dirty.
20
Faults often have simple explanations. Please read the
notes in the table before calling customer service.
Solution
Check in the fuse box whether the fuse has
opened.
The space between flame igniter and burner
must be clean.
Carefully dry the burner lids.
Check whether the lids are correctly
positioned.
Light burner by hand.
Correctly position burner parts.
Clean openings of the burner.
Open the intermediate valves.
Replace gas cylinder.
Check gas cylinder connection for leaks.
the control knob for a few seconds. Press in
firmly.
Clean openings of the burner.
Publicidad
