Publicidad
Idiomas disponibles
Idiomas disponibles
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
PROBLEM
Although the lever release
button and brush rotation
levers are pressed at the
same time, the machine
does not start.
The pad holder does not ro-
tate.
No water is released
Polishing liquid is not re-
leased.
Insufficient floor cleaning
The machine operates er-
ratically or vibrates heavily.
The machine turns off unex-
pectedly during operation.
TROUBLESHOOTING
CAUSE
The appliance is
unplugged.
The brush/pad holder rota-
tion lever is not pressed.
Presence of foreign bodies.
The tank is empty.
Water
supply
pressed.
The tank is empty.
Button not pressed.
Pad or chemical product not
suitable.
Pad worn.
Check that the pad is
perfectly centred in the pad
holder.
Pad not suited to floor type.
Motor thermal protection
activation.
ENGLISH - 9
SOLUTION
Plug the appliance in.
Press the lever.
Remove any foreign bodies
stuck in the appliance.
Fill the tank.
lever
not
Press the lever.
Fill the tank.
Press the button.
Use a pad or chemical prod-
uct that is appropriate to the
type of floor to be polished.
Replace the pad.
Replace the pad, centring it
correctly in the pad holder.
Use a pad suited to the floor
surface.
Restore the reset button
until it "Clicks" and make
sure to work in the correct
range.
Publicidad
