Klarstein IGNITO 4 Manual página 36

EN
36
TROUBLESHOOTING
Repairs should be performed by a licensed technician only.Improper repair may result
in considerable danger to you and others. However, some minor problems can be
resolved as follows.
Problem
Not ignited
Badly ignited
Noise made when
combusted and ignited
Flame goes out
when in use.
Yellow Flame
Probable cause
No Spark.
The gas supply is closed.
The burner lid is badly
assembled.
The gas supply is not
completely open.
The burner lid is badly
assembled..
The ignition plug is
contaminated with alien
substance.
The burners are wet.
The holes in the flame
spreader are clogged..
The burner lid is badly
assembled.
The flame supervision
device is contaminated
with alien substance.
Product being cooked
has boiled over and
extinguished the flame.
A strong draught may
have blown the flame out.
The holes in the flame
spreader are clogged.
Solution
Check the electricity
supply.
Assemble the lid correctly.
Open the gas supply
completely.
Open the gas supply
completely.
Assemble the lid correctly.
Wipe alien substance
with a dry cloth.
Dry the burners lids
carefully.
Clean the flame spreader.
Assemble the burner lid
correctly..
Clean the flame
supervision device.
Turn off burner knob.Wait
one minute and reignite
zone.
Please turn off zone and
check cooking area for
draught such as open
windows.Wait one minute
and reignite zone.
Clean the flame spreader.