Kärcher K 3 Compact Manual De Instrucciones página 10

Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the event
of any shipping damage, please notify your dealer.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page
Illustration A
Transport wheel
1
Storage for high-pressure hose and mains connec-
2
tion cable
Storage for spray lance
3
Storage for high-pressure gun
4
Spray lance with dirt grinder for stubborn soiling
5
Vario Power spray lance for common cleaning tasks:
6
The working pressure can be continuously in-
creased from "SOFT" to "HARD". To adjust the work-
ing pressure, release the high-pressure gun lever
and turn the spray lance to the desired position. De-
tergent can be added to the water jet when the spray
lance is turned all the way in the SOFT direction.
High-pressure gun
7
Clamp for the high-pressure hose
8
High-pressure gun lever
9
High-pressure gun lock
10
High-pressure hose
11
Mains connection cable with mains plug
12
Trigger "0/OFF" / "I/ON"
13
Carrying handle
14
Transport handle, telescoping
15
Coupling for high-pressure hose
16
Type plate
17
Water connection with integrated sieve
18
Suction hose for detergent (with filter)
19
Water connection coupling
20
**Garden hose (fabric reinforced, diameter at least
21
1/2 inch (13 mm), length at least 7.5 m, with com-
mercially available quick coupling)
*Washing brush, suitable for working with deter-
22
gents
*Foam nozzle for powerful detergent foam
23
*Detergent container
24
* optional, ** additionally required
10
Safety devices
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
The power switch prevents unintentional operation of
the device.
High-pressure gun lock
The lock locks the lever of the high-pressure gun and
prevents the device from starting unintentionally.
Auto-stop function
If the lever of the high-pressure gun is released, the
pressure switch turns off the pump and the high-pres-
sure jet stops. The pump switches on again when the le-
ver is pressed.
Symbols on the device
Do not aim the high-pressure jet may at per-
sons, animals, live electrical equipment or
the device itself.
Protect the device against frost.
The device may not be connected to the
public drinking water network.
For the illustrations, refer to the graphics page.
Fit the supplied loose parts onto the device before start-
ing up the device.
Fitting the wheels
1. Fasten and secure the wheels to the device.
Illustration B
Installing the water connection coupling
1. Screw the water connection coupling onto the water
connection on the device.
Illustration C
Initial startup
1. Place the device on a flat and level surface.
2. Connect the high-pressure hose to the device.
a Pull out the clamp on the coupling.
b Insert the high-pressure hose into the coupling.
c Insert the clamp into the coupling.
Illustration D
3. Connect the high-pressure hose to the high-pres-
sure gun.
a Squeeze the clamp.
b Pull out the clamp.
c Insert the high-pressure hose.
d Press the clamp in until it latches into place.
Illustration E
4. Check for a secure connection by pulling on the
high-pressure hose.
5. Plug the mains plug into a mains socket.
For the connection values, see the type plate or chapter
Technical data.
Observe the water distribution company regulations.
ATTENTION
Damage through contaminated water
Contamination in the water can damage the pump and
the accessories.
English
Power switch
Assembly
Water supply