Husqvarna CS 2238 Manual De Instrucciones página 25

Bar and chain combinations
The following combinations are CE approved.
Length, inch Pitch, inch
13 0,325
15 0,325
16 0,325
18 0,325
H30
3/16" /4,8
EC-declaration of conformity
(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws
Jonsered CS 2238 from 2007's serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), are in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2001, EN ISO 11681-1:2004
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificate for
EC type examination in accordance with annex VI, has the number: 404/08/1253.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified
conformity with annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment"
2000/14/EC. The certificates have the numbers: 26/161/004 - CS 2238.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna June 23, 2008
Bengt Frögelius, Development director chainsaw R&D
5451868-53 Rev. 2 2008-12-19
TECHNICAL DATA
Bar
Gauge, mm Max. nose radius
10T
10T
1,3
10T
10T
60°
Type
Husqvarna H30
30° 10°
Chain
Length, drive links (no.)
56
64
66
72
0,025"/0,65
English – 25