Celexon HomeCinema Plus Manual De Instrucciones página 23

• All supply lines and cables must not be subjected to additional loads and must be
laid in such a way that they are not damaged or crushed.
• Please position the screen so that there is no wind, so that it cannot fall over. The
screen is only approved for indoor use.
• Failure to follow the above instructions may result in personal injury and damage
to the product or equipment connected to it. Incorrect installation or use may also
invalidate the warranty.
• If you are unsure about the use of the product, please contact your specia-
list personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail:
info@celexon.co.uk).
• Technical changes and errors excepted.
The manufacturer accepts no responsibility for damage to property or personal injury if
the screen is used outside the recommended specifications, or in the event of improper
installation. Do not use this screen in the vicinity of heaters or air conditioners. Also,
do not mount or use the product in direct sunlight or in front of a window. Due to the
temperature-sensitive PVC surface, the projection screen fabric may be permanently
damaged.
We recommend that you wait approx. 2 hours after delivery before installing the pro-
jection screen. This allows the screen to acclimatise. Wait approx. 24 hours if the
projection screen is coming from a particularly cold environment to a warm one (or
vice versa).
Please avoid any stains on the surface of the screen. These may not be able to be
removed.
The positions of the end points on the motor are already optimally set at the factory
and must not be changed.
DISCLAIMER
The information in this document is subject to change without notice by the
manufacturer. Changes will be added to subsequent versions of this manual.
Errors excepted.
2