Celexon HomeCinema Plus Manual De Instrucciones página 28

MOUNTING ON THE WALL OR ON A FURNITURE BACK PANEL
Mark an „installation line" at the height where the screen is to be positioned la-
ter. The „installation line" corresponds to the lower edge of the screen housing.
Mark the centre of the screen on the installation line (Fig.1). The distance of the
two mounting brackets (centre to centre of the brackets!) must be 1,600 mm.
Accordingly, the two brackets are each 800 mm to the left and right of the
centre mark. Mark this exactly on the installation line.
Wall or furniture back panel
Attention: Please note the 4 possible installation methods (Fig.2)!
pending on the method used, align the mounting brackets accordingly
on the installation line in such a way that the support surface of the bra-
cket on which the screen is placed is the same as the installation line!
Installation types 1 and 2 are different from installation types 3 and 4!
Align the brackets with the installation line and mark the 4 drill holes per bra-
cket on your wall.
Load bearing surface
Fig. 1
De-
7