Publicidad
Idiomas disponibles
Idiomas disponibles
Flatness of the fabric:
•
The black drop must be in the range of min. 250 mm - max. 400 mm. to
maintain the flatness.
•
Do not change the feed on the motor, as this will change the digital setting
that controls the extension height and may permanently adjust or damage
your product.
•
Touch the fabric with your fingers as infrequently as possible. The material
is very sensitive and because of its surface coating can only be cleaned
to a limited extent. This cannot be avoided due to the screen technology.
•
The fabric, like all thermoplastics, is naturally subject to material deforma-
tion with decreasing or increasing room temperature. Slow temperature
changes that affect the product as a whole, as usually occur indoors, are
harmless. (e.g. as they occur with the change of seasons). Make absolutely
sure that the product and especially the extended fabric, are not subject to
different temperatures at different points. This uneven temperature effect
would „strain" the material, as colder areas deform differently than warmer
areas, which would very likely result in your ultra-short distance projection
showing distortions in the image. (e.g. sunlight, placed directly on a radia-
tor, on air outlets or intakes of any air conditioners, other heat generating
AV components such as AV receivers, game consoles or computers).
•
Place the screen in the room in such a way that such temperature influen-
ces are not present. Even short temperature effects can lead to deformati-
on of the fabric and may be irreversible.
•
Position heat-radiating devices in such a way that the air currents do not
affect the screen.
•
Always place (or store) the projection screen absolutely horizontally and
level. Use a spirit level to check this. A crooked screen can have a negative
effect on the mechanics, flatness and lifespan.
•
Always make sure that the extension area and the area of the flap opening
remain free of obstacles.
•
Do not place any objects on the flap or near the opening area.
•
Prevent any liquids near the screen! Ingress of liquids (e.g. watering flo-
wers, flower vases, etc.) will have a negative effect on your product and
may destroy the electronics of the product!
•
Only extend the screen if it is standing completely on a solid surface or if
it is properly screwed to the enclosed mounting brackets.
17
Publicidad
