Menu Functions - Xylem SI Analytics CT 72/P Manual De Instrucciones

7.

Menu functions


Menu level 1
The term „Menu functions" refers to settings such as
1. Open the menu by pressing the
2. Use the
3. Press the
Press the
Start program

Administration and creation of programs
Configuration of the unit
REMOTE – on / off (remote control via RS232)
AUTOST – AUTOSTART on / off
TIME / DATE – setting time and date
RESET – factory settings
Control characteristics and parameters
C-TYPE – Internal or external control
DYNAMICS - internal
Control parameter - XP-, TN-, TV- INTERNAL
Adjustable interface parameters
BAUDRATE, PARITY, HANDSHAKE
ATC - Absolute Temperature Calibration,
Sensor calibration INTERNAL SENSOR,
3-point calibration
Limitations of temperature and capacity
SETPOINT MAX / MIN - Maximum and minimum setpoint
HEAT MAX – Set maximum heating
COOLING MAX – Set maximum cooling
INTERN MAX / MIN – Limitation of the temperature range
BAND HIGH / LOW – Band limit
Menu functions
keys to scroll in menu level 1.
key to change to menu level 2.
key if settings are to be retained.
72
key.
Page 73
Page 76
Page 78
Page 81
Page 83
Page 84
Page 89