Threading The Machine - Janome 3022 Manual De Instrucciones

z
c
b
x
w
e
c
r
t
v
bn
q
x
v
y
u
i

Threading the Machine

z Draw the thread from the spool. Hold the upper
thread at the spool with your finger.
q Hold the thread
x Slip the thread under the thread guide from the
right and down along the right channel.
Be sure that the thread passes between the
tension disks.
w Thread guide
e Right channel
r Tension disks
c Then draw the thread around the bottom of the
thread guide plate.
t Thread guide plate
v Firmly draw the thread up along the left channel to
the thread take-up lever and down into its eye from
the right to the left.
y Thread take-up lever
b Then down through the lower threaed guide.
u Lower thread guide
n Slide the thread behind the needle bar thread
guide on the left.
i Needle bar thread guide
24
Raise the presser foot.
Press the Up/Down needle
button to raise the thread
take-up lever to its highest
position.