Zigzag Stitch; Altering The Stitch Width; Altering The Stitch Length - Janome 3022 Manual De Instrucciones

q w
q
w

Zigzag Stitch

Machine Settings
q Pattern:
#08
w Presser foot:
Zigzag foot A
The zigzag stitch is used for various sewing needs
including overcasting. It can be used on most woven
fabrics.
A dense zigzag stitch can also be used for appliqué.

Altering the stitch width

The stitch width can be altered between 0.0 and 7.0.
Press the mode key
adjustment (the middle green light lights up).
The preset value "5.0" will be indicated.
Press the plus (+) key to increase the stitch width.
Press the minus (–) key to decrease the stitch width.
q Stitch width

Altering the stitch length

The stitch length can be altered between 0.0 and 5.0.
Press the mode key
adjustment (the bottom green light lights up).
The preset value 2.0 will be indicated.
Press the plus (+) key to increase the stitch length.
Press the minus (–) key to decrease the stitch length.
w Stitch length
NOTE:
The stitch length and width can be altered while
stitching.
36
to activate stitch length
to activate stitch length