Setting the Cooking Mode
and Temperature
Heating Time Limitation
To set the Cooking Mode and Temperature:
1. Turn the Cooking Mode dial to the preferred cooking mode.
The default temperature and the arrow next to Temp appear in the display:
2. Turn the Settings dial to set the temperature.
The oven starts after a few seconds.
While the oven is preheating, either the current or programmed oven
temperature is displayed, depending on what is set in the Customer Settings.
Preheat monitor:
Shows the progress of the preheat process. When all five bars are
lit and buzzer sounds, preheat is complete. Some modes start with
all bars lit.
Note: •
Press Temp to switch between the programmed and current temperature.
•
The temperature can always be changed when the arrow next to Temp is
illuminated. Press Temp to activate the arrow.
•
In Broil mode, adjust the broil setting between 1 and 3 (1=low, 2=medium,
3=high).
The maximum heating time is limited. If you forget to turn off the oven, it turns off
automatically after a set period of time (see table below), unless using Cook Time.
The maximum time allowed depends on the temperature:
Temperature in ºF
100–200
201–550
Heating stops until a setting is changed.
Temp
Temperature in ºC
30–120
121–300
Max. time allowed
without activity
24 hours
12 hours
English 11