Char-Griller Duo 5050 Manuel Du Propriétaire página 63

Step 9:
Install the Burners into the Gas Grill Body by inserting the IGNITER WIRES and Burn-
ers through the open holes at the front of the Grill Body from inside of the Grill Body, see figure
9A. (NOTE: IGNITER MUST BE ON BOTTOM SIDE OF BURNER). The BURNER with the longer wire
goes on the right side of the GRILL BODY. Making sure that the Valve goes inside each burner,
see figure 9B. Then secure the Burners to the Grill Body with the screws provided, see figure
9C.
Igniter with Wire
Burner
Figure 9B
Burner
Figure 9A
Screw
Burner
Valve
Figure 9C
B-9