Changing The Exhaust Direction; Using The Nose Cap - Hitachi Koki NT 50AE2 Instrucciones Y Manual De Seguridad

English
4 Connect the air hose.
ALWAYS WEAR SAFETY GLASSES.
Perform a nailing test.
5 DISCONNECT AIR HOSE FROM NAILER.
6 Choose a suitable position for the adjuster.
NOTE:
●
The nail might not drive deep enough if using
high pressure with the adjuster set upwards
(shallow side) due to factors such as the
material hardness or nail type.
If that happens, reduce pressure and set the
adjuster to lowest position so the nail drives
in at a good position.

CHANGING THE EXHAUST DIRECTION

● When changing the exhaust direction, be sure to remove your
finger from the trigger and disconnect the air hose from the nailer.
The direction of the exhaust vent can be changed by turning the top cover.

USING THE NOSE CAP

● When detaching or attaching the nose cap, be sure to remove
your finger from the trigger and disconnect the air hose from the
nailer.
22
Exhaust vent
2
Too deep
2
Too shallow
WARNING
Top cover
WARNING
Turn adjuster
Flush
Turn adjuster
Flush