Removing The Tires - John Bean T1545 Manual Del Operador

5.1.5
5.1.6
5.1.7
T1545T

5.2.2 Removing the tires

B E F O R E P R O C E E D I N G W I T H T H E T Y R E
EXTRACTION, CHECK THAT BOTH BEADS
ARE COMPLETELY BROKEN.
· Insert the bead lifting tool under the bead and over the
support of the mount/demount tool. Lift the bead onto
the mounting fi nger. To facilitate this operation, press
with left hand on the bead in position diametrically
opposite to that of the tool. If desired, the bead lifting
tool can be removed after lifting the bead onto the
fi nger (Fig. 5.1-5).
· Rotate the turntable clockwise and at the same time
push down on the tire sidewall to move the bead into
the drop-center of the rim (Fig.5.1-6).
· Repeat the process for removing the lower bead. With
left hand, lift the bead in position diametrically opposite
the tool to keep it in the drop center (Fig. 5.1-7). Move
the swing arm aside and remove the tire.
19
EN -