Publicidad
Idiomas disponibles
Idiomas disponibles
2. Introduction
MANUFACTURER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and suc-
cess.
NOTE:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised special-
ists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the electrical
regulations and VDE provisions 0100, DIN 13 / VDE0113
not being observed.
Please consider:
Read through the complete text in the operating manual be-
fore installing and commissioning the device.
This operating manual should help you to familiarise yourself
with your device and to use it for its intended purpose.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding
danger, for minimising repair costs and downtimes, and for
increasing the reliability and extending the service life of the
device.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the device in your country.
Keep the operating manual package with the machine at all
times and store it in a plastic cover to protect it from dirt and
moisture. They must be read and carefully observed by all
operating personnel before starting the work.
The device may only be used by personnel who have been
trained to use it and who have been instructed with respect
to the associated hazards. The required minimum age must
be observed.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules relating to the operation of such
machines must also be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.
4
GB/IE
3. Device description
1.
Filling funnel
2.
On switch
3.
Off switch
4.
Upper section of machine
5.
Adjusting screw
5a. Fixing screw (pre-mounted)
5b. Handle for the adjusting screw
6.
Support foot
7.
Wheel
8.
Drip tray
9.
Safety switch
10. Mains cable
11. Switch for direction of roll rotation
12. Overload switch
13. Wheel axle
14. Locknut
15. Wheel sleeve
16. Washer
17.
Wheel cap
18. Status LED
19. Stopper holder
20. Strain relief
21. Gearing cover
21a. Screws
22. Cutting roller
23. Pressure plate
a.) Spanner
b.) Allen key
c.) Plunger
4. Scope of delivery
• Upper section of machine
• Plunger
• Wheel axle
• Collecting container with safety switch
• Wheel (2x)
• Wheel cap (2x)
• Locknut (2x)
• Wheel sleeve (2x)
• Washer (4x)
• Spanner
• Allen key (5 mm)
• Handle for the adjusting screw
• Operating manual
5. Proper use
The device is designed for shredding fibrous or woody garden
waste, such as hedge and tree cuttings, branches, bark or fir
cones.
Proper use includes the shredding of:
• All types of branches up to a maximum diameter of 42
mm (depending on the type of wood and freshness)
• Wilting, moist, garden waste that has already been stored
for several days, alternating with branches.
Publicidad
