Intended Use - Storz T-SCOPE Serie Manual De Instrucciones

+
Videoaufnahme
Hersteller
2. 4
Inspektion von technischen Baugruppen, wie z. B. Turbinen,
zum sofortigen Erlöschen aller Garantieansprüche.
Inspektion von technischen Baugruppen, wie z. B. Turbinen,
Bild- und Datensignalen in der industriellen Endoskopie
sofortigen Erlöschen aller Garantieansprüche.
Inspektion von technischen Baugruppen, wie z. B. Turbinen,
in dieser Gebrauchsanweisung beschrieben, ist aus
+
2. 4

Intended use

inspection of technical assemblies, such as turbines, motors,
to play back images during an endoscopic inspection.
and consumables which have been designated as suitable
those described above is not permitted for safety reasons.
invalidate all warranty rights.
The T-CAM camera head is designed for the endoscopic
inspection of technical assemblies, such as turbines, motors,
cavities in buildings and vehicle bodies, etc. The T-CAM
is a camera head which transmits image and data signals
The T-CAM camera head may only be used with accessories
and consumables which have been designated as suitable
those described above is not permitted for safety reasons.
prohibited for safety reasons and will immediately invalidate
all warranty rights.
of technical assemblies, such as turbines, motors, cavities in
only be used with accessories and consumables which have
-
product in fields other than those described above is not
reasons and will immediately invalidate all warranty rights.
control key)
Video recording
Manufacturer