Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Place a glass below the dispensing spout.
Press the FREE DOSE supply button and wait for
water to be supplied.
In case water is not supplied, repeat the cycle
several times (up to six times max.).
Empty the full tank by performing again the dis-
pensing cycles to end the rinsing procedure.
Empty the glass every time it reaches its maximum
capacity level, by temporarily interrupting the cycle.
STAND-BY FUNCTION
To ensure the energy conservation the machine
automatically passes to the stand-by mode after
30 minutes of not being used.
The machine can be set to the stand-by mode
manually, first of the 30 minutes' time, by keeping
both buttons pressed down for at least 3 seconds.
This mode is indicated by the switching off of the
buttons.
The machine can be reactivated by pressing the
buttons again.
28
PREPARING THE MACHINE
PREPARATION FOR COFFEE BREWING
The coffee machine features two positions for
preparing the coffee: espresso cup/mug or glass.
Place the cup or small cup under the coffee dis-
penser, if you wish to have traditional espresso cof-
fee.
Remove the drop collecting tray to use a glass, if
you wish to have weak coffee.
Publicidad
