Publicidad
Idiomas disponibles
Idiomas disponibles
We are not liable for any damages in case of:
• incorrect use and other uses than the
intended purposes;
• repairs not carried out at Lavazza authorized
service centers;
• tampering with the power cord;
• tampering with any part of the machine;
• use of spare parts and accessories which are
not original;
• no water softening;
• storage in rooms below 39,2°F (4°C);
• use below 41°F (5°C);
• use over 104°F (40°C);
• using non-compatible capsules.
In any of these cases, the warranty is cancelled.
STARTING THE MACHINE
Set the machine on a flat, stable surface, far
away from water or heat sources.
Do not connect the machine to the electric
power supply before filling the tank.
Damage caused by failure to apply these in-
structions will void the guarantee.
Rinse the tank before use.
Fill the water tank up to the specified MAX level,
by using only fresh, non-carbonated drinking water.
Fit the tank back into place and close it again by
using the cover.
The water level should never exceed the MAX
indication and it must always be maintained
above MIN.
Hot water and other liquids can damage the
tank.
MAX
PREPARING THE MACHINE
The use of a water filter (an optional accessory) im-
proves water quality and prolongs machine life.
Only use products specifically for coffee machines,
commonly available on the market and in compli-
ance with current pertinent standards. In order to
insert the filter, follow the instruction sheet which
comes with the accessory. Change the filter at the
intervals indicated on the filter instructions sheet.
Insert the plug into the socket.
Make sure that the hands, the machine, the
cord and the support surface of the machine
are not wet.
Press one of the switch-on/supply buttons to
switch the macchine on.
The coffee machine starts the heating cycle.
The switch-on/supply buttons will start blinking to
a light white.
The machine will be ready for use when the
switch-on/ supply buttons light up to a steady
white light white light.
EN
27
Publicidad
