Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Press the ESPRESSO button to start delivery. The
machine will stop delivery automatically when the
programmed measure is reached (30 ml).
The switch-on/supply button will light up to a blink-
ing white light when the product is being supplied.
If the electric power supply is cut off during the
supply cycle, first reactivate the power supply,
then switch the machine on again and restart
the coffee supply procedure by repeating the
operations described in steps
If during the supply cycle, water lacks in the tank,
water lack will be indicated by white steady LED on
the selected button, while the LED on the other
button will start flashing, then proceed as follows:
- Fill the water tank up to the MAX level indicated.
- Press the power-on/supply button previously se-
lected. The button will start flashing and the coffee
supply procedure will restart.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the cap-
sule loading lever to unload the exhausted cap-
sule.
30
PREPARING THE COFFEE
,
,
and
.
FREE DOSE BEVERAGE DELIVERY
Do steps:
,
,
ESPRESSO DELIVERY.
Press the FREE DOSE BEVERAGE button to
start delivery. Once the desired amount of brewed
coffee is reached, press the button again to stop
brewing.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the cap-
sule loading lever to unload the exhausted ca
psule.
After 5 supplies the switch-on/supply buttons start
blinking fast with white light to indicate that the
capsules drawer is filled. Empty the capsules drawer
and press one of the buttons to reset the machine.
Now the machine is ready for a new supply.
In case of soluble pods, it is recommended that a
brief plain (i.e. by using only water) supply should be
dispensed before inserting the pod, so that you can
best enjoy the product.
and
in paragraph
Publicidad
