Makita VC007GL Manual De Instrucciones página 11

ASSEMBLY
CAUTION:
Always be sure that the appliance
is switched off and the battery cartridges are
removed before carrying out any work on the
appliance.
CAUTION:
Always wear dust mask during
assembly or maintenance.
Installing and disposing filter bag
Optional accessory
WARNING:
Before using a filter bag, make
sure that the filter unit is used together. Failure to
use the filter unit together may cause unusual noise
and heat, resulting in a fire.
NOTICE:
Never pick up water or other liquids or
wet dusts when using a filter bag. Picking up such
things may cause the filter bag breakage.
1. Release the locking hooks and lift the head unit up
off the tank.
Fig.13
► 1. Locking hook
2. Unfold a filter bag.
3. Align the filter bag opening with the dust intake of
the tank.
4.
so that it is positioned at the end beyond the detent
protrusion.
1
Fig.14
► 1. Filter bag 2. Cardboard opening 3. Filter bag
holder 4. Dust intake 5. Edge
When disposing the filter bag, pull the edge on the filter
bag's mouth so that the mouth is closed by a paper.
Installing polyethylene bag
Lay a polyethylene bag over the tank, and slip one side
of the top edge of the bag at its open end in between
the holder plate and the front wall of the tank.
Then, spread the other top edges of the bag outwards
over the top rims of the tank.
Polyethylene bag can be used with filter bag.
1
Fig.15
► 1. Holder plate 2. Front wall of tank 3. Polyethylene
bag
NOTE: A polyethylene bag available on the market
can be used. The thickness is over 0.04 mm (1.6 mil)
and the perimeter is over 2,000 mm (78-3/4") one is
recommended.
NOTE: Too much dust will tear the polyethylene bag
easily, so do not overfill the bag. Disposing the heavy
bag may be a burden on a human body.
11 ENGLISH
Insert the cardboard of the filter bag onto the tool
4
1
2
3
3 2
5