Segway eScooter E300SE Manual Del Usuario página 11

Ignition
37
OFF position
The vehicle is powered off.
ON position
The vehicle is powered on.
3. First Use
For your safety, please go through the New Rider Tutorial in Segway-Ninebot App.
Turn on
1
a. Open the seat
bucket with your
key, and pull the
foot panel switch
to unlock it.
c. Connect the
battery plug
and snap on
rubber cover.
17
OPEN position
Rotate left to open the seat bucket.
LOCK position
Turn the handlebar to the very left,
then turn the key to the left end while
pressing it down, so that the handlebar
is locked.
b. Lift the lid.
d. Close the lid.
Powering-on and activation
2
a. Power on:
Option 1: Power on with the key [see Ignition].
37
Option 2: Press the ON button on the remote
control [see 41 Functions of the
Remote Control for details].
b. Activation:
Enable AirLock: Enable Bluetooth on your
phone, scan the QR Code on the dashboard to
download and install the app > register and log
in > click "Search device" > Connect. Follow
the instructions to bind your Segway eScooter.
3 How to power on/lock the vehicle after activation
There are four ways to power on/lock the vehicle.
Option 1: Use the remote control: Press ON/OFF button to unlock and power on the vehicle; press the
lock button to power off and lock. [See 41 Functions of the Remote Control for details]
* Note: The handlebar can only be locked or unlocked by the key, not the remote control.
Option 2: Use the key: Insert the key and turn it clockwise to ON position to power on or counterclockwise
to LOCK position to lock. [see Ignition]
37
Option 3: Press the Auto button [see 36 Controller Switch]
Option 4: Via the Segway-Ninebot app as shown below:
a. Press the On/Off button on the vehicle homepage.
b. Press "Confirm" on the popped-up window.
c. When the indicator on the dashboard is pre-light, press and hold the Auto button to power on/lock the
vehicle.
Option 1 Option 2
ON position
Scan
Search device
Register Log in
Results: 1 device
18