Segway eScooter E300SE Manual Del Usuario página 13

d. Place battery① into the compartment, and take out the plug on
c.Insert the plug into battery②'s
the same side as the port of the battery①.
port.
①
e. Insert the plug into battery②'s port.
①
②
* The eScooter contains two same batteries, shown as ①, ②.
21
①
①
f. Install the plug covers on the plugs.
① ①
②
* plug covers①②
②
6. Installation of Additional Battery (optional)
a. Open the seat.
②
d. Take out the plug.
Plug
g. Install the side panels of the
seat bucket.
* For details, please refer to the instruction of install the Lithium-ion Battery.
b. Remove the panels. c.Remove the side panel and cut
a round hole as shown below.
panels
e. Place the additional battery f. Insert the plug into the
into the seat bucket. battery port.
h. Place the battery protective
cover onto the battery.
Plug
22