Publicidad
Idiomas disponibles
Idiomas disponibles
Symbol
Symbol Name
Description
READY indicator
When READY is on, the vehicle is good to go.
1. Flash when the left/right turn button is
pressed.
2. When both direction indicators (left and
Direction indicator
right) lights up simultaneously with the
(Left/Right)
warning indicator, the vehicle is in a
warning state.
Passing beam headlamp
The high beam is on when it lights up.
Driving beam headlamp
The low beam is on when it lights up.
The battery power is low and needs charging
Battery charge
when it lights up.
Malfunction indicator
The indicator light will light up when the
lamp
vehicle has a malfunction.
Bluetooth
The vehicle is connected to a phone when it lights up.
The indicator light is off when the vehicle
ABS indicator
working normally.
Cruise control
The vehicle is in cruise control when it lights up.
When the icon flashes, the vehicle has a malfunction.
Vehicle fault
Vehicle lock
The vehicle is locked when the icon lights up.
1. Indicates the current speed.
Speed display
2. Displays the error code when there is a
malfunction.
Clock
Indicates current time.
Range
Indicates the total distance traveled.
: While the vehicle is locked, insert the key and turn to ON mode.
: The vehicle is still at ON mode when trying to turn it off via remote control or by pressing the Auto button.
Status display
: The throttle is turned while the side is supported.
: The throttle is turned when there is no rider.
11
Details
When the side stand is folded up and a person
sits on the seat, press the Auto Key, and
is on.
1. When toggled
(at left combination switch) to the
left/right, the left/right turn signal turns on. Press
again to turn off the turn signal.
2. When pressed
(at right combination switch) , the
left/right turn signal and this indicator will flash to
alert pedestrians and other vehicles. press
again
to remove the warning.
Find
button at left combination switch,
toggle
to light up the high beam.
When the battery power is low, this indicator lights up
and the battery level bar on the dashboard flashes.
This indicator will flash once when powering on;
This indicator will light up when the vehicle has an
electric malfunction, and the error code will be
displayed on the dashboard.
If the symbol stays on when the speed is ≥ 5 km/h, it
means there is an error in the ABS.
During riding, press
(at the left combination
switch) to lock the current vehicle speed; Turn the
throttle or brake lever to remove the cruise control.
Click the "+/-" button to increase or decrease the
cruise speed by 5 km/h.
Long press the "+/-" button to continuously increase
or decrease the cruise speed by 1 km/h.
After releasing the "+/-" button, the vehicle cruises at
the latest set speed.
Press
on the Remote Control to lock the vehicle;
Press
to unlock the vehicle, at the same time, this
indicator off.
: Imperial units
: Metric unit
: Imperial units
: Metric unit
: The throttle is turned while charging.
Symbol
Symbol Name
Description
Riding mode
Indicates the current gear.
Remaining battery level
Bars of remaining battery.
Controller switch
36
Left combination switch
Passing/Driving
beam switch
Turn signal switch
Cruise switch
Horn switch
Symbol
Symbol Name
Meaning
1. Toggle it to the right to activate the high beam; toggle it to the center to turn off the high beam.
Passing/Driving
beam switch
2. Slide it all the way to the left to turn on the overtaking signal; Release to cancel the overtaking signal.
When toggled to the left, the left turn signal turns on. The button resets automatically after releasing.
Toggle it to the center and press to turn off the left turn signal.
Turn signal
switch
When toggled to the right, the right turn signal is on. The button resets automatically after releasing.
Place it at the center and hold down to turn off the right turn signal.
Horn switch
When pressed, the horn is sounded to alert pedestrians or other vehicles.
When pressed, the vehicle will cruise at the current speed. The cruise control can be cancelled by
Cruise switch
pressing the button again, turning the throttle, or by braking.
Riding mode
Press "+" to switch the modes in sequential order, and press "-" to switch the modes in reverse order.
switch
When the vehicle is on, double-press to open the seat bucket or press and hold to switch off the vehicle. If the
Auto key
AirLock is enabled in the App, hold this button while the paired phone is within range to turn on the vehicle.
When the side stand is folded up and the rider is on the seat, press this key and READY indicator is on.
When the button is pressed, both the left and right turn signals will flash to alert pedestrians and other
Hazard warning
switch
vehicles.
Comments
Right combination switch
Riding mode switch
Hazard warning
switch
Auto key
12
Publicidad
