Descargar Imprimir esta página

SFS GESIPA Birdie Manual Del Usuario página 28

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Maintenance and service
Remove the battery from the tool before
any maintenance work on the tool, as well
as during transport and storage of the tool.
There is a risk of injury if the on/off switch is
operated unintentionally.
Keep the tool and ventilation slots clean in
order to work effectively and safely.
Tool maintenance is limited to the grip
mechanism and its wear parts only. Clean
EN
the jaws and the jaw pusher and oil or
grease sliding surfaces. Replace the jaws if
they are worn (blunt teeth)  see p. Seite
13
Parts for which a replacement procedure
is not described must be replaced only by
personnel with specialist knowledge, or by
GESIPA
Service.
®
Regular maintenance extends the service
life of your high-quality GESIPA
should be performed at least every 2 years
by an authorised workshop or by GESIPA
Service. Servicing ahead of schedule
is recommended if tools are subject to
intensive use.
Disposal
Do not dispose of electrical equipment,
batteries/rechargeable batteries, accessories
or packaging in household waste.
As a consumer, you are obliged by law
to dispose of old tools and batteries/
rechargeable batteries at a recycling
facility, collection point or retailer so that
they can be recycled in an environmentally
responsible manner.
Warranty
The warranty conditions in the currently
valid version apply. They can be viewed at
the following link: www. gesipa.com/agb
28
The latest spare parts list and exploded
diagram for your tool, as well as information
on GESIPA
at www. gesipa.com.
Repair
Repairs must be performed only by a
suitable specialist. In case of doubt, the
blind rivet tool must be sent in to GESIPA
Service.
Repairs under warranty are always
performed by the manufacturer. Repairs
outside of the warranty period must only
be performed by skilled personnel. Failure
to observe specifications for assembly and
adjustment and operation by unskilled
personnel can lead to severe damage to the
blind rivet tool. In case of doubt, the blind
rivet tool must be sent in to GESIPA
tools. It
®
Only use original replacement parts for
repairs.
®
Obtain information from local authorities or
from your specialist retailer about recycling
facilities and collection points.
Dangerous substances in power tools and
batteries/rechargeable batteries can harm
your health and the environment.
Batteries/rechargeable batteries must be
removed from the device and disposed of
separately in a discharged state. Cover
contacts with adhesive tape to safeguard
against a short circuit.
Service, can be obtained online
®
®
Service.
®
English

Publicidad

loading

Este manual también es adecuado para:

1746720