WARNING
Do NOT use the device:
• on broken skin.
• on open wounds.
• if you suffer from a skin disease or irritated skin.
• immediately after sunbathing.
• if you are taking medication that contains steroids.
Notes on handling batteries
• If your skin or eyes come into contact with fluid from the battery cell, flush out the affected areas with plenty of water
and seek medical assistance.
• Risk of explosion! Never throw batteries into a fire.
• Do not disassemble, split or crush the batteries.
• Only use chargers specified in the instructions for use.
• Batteries must be charged correctly prior to use. The instructions from the manufacturer and the specifications in these
instructions for use regarding correct charging must be observed at all times.
• Fully charge the battery prior to initial use (see Chapter 7.1).
• In order to achieve as long a battery service life as possible, fully charge the battery at least twice per year.
IMPORTANT
Only specialist personnel may perform repairs on electrical devices. Improper repairs may subject users to considerable
danger. In the event of a fault or damage, have the device repaired by a certified specialist workshop.
5. Device description
ON/OFF/speed button
6. Initial use
6.1 Charging the device
Charge the device for at least 6 hours before initial operation. To do this, proceed as follows:
1. Insert the mains cable into the charger.
2. Insert the mains adapter into the socket.
3. Insert the facial brush into the charger from above. While charging is in progress, the LED lights for the ON/OFF/speed
button light up alternately in a circle. Once the facial brush has been fully charged, the LED lights for the ON/OFF/
speed button light up permanently.
Brush attachment
Rotation button
Brush attachment
for normal skin
Brush attachment
for sensitive skin
Brush attachment for
deep-pore cleansing
Brush attachment for
deep-cleansing exfoliation
10