SICK GL6L Guia De Inicio Rapido página 5

GTE6L
Operating reserve
100
3
90 %
10
2
18 %
1
0
0 100 200
(3.94) (7.87)
Recommended sensing range for
the best performance
1
25/30 100/130
2
17/20 200 250
3
0/5
0 100 200 300
(3.94) (7.87) (11.81)
Distance in mm (inch)
D
C
A
A = Sensing range min. in mm
B = Sensing range max. in mm
C = Viewing range
D = Adjustable switching threshold
Recommended sensing range for the best performance
6 % / 90 %
1
18 % / 90 %
2
90 % / 90 %
3
GSE6L
1
GSE6L
1
Sensing range
1
Schaltabstand
Distanza di lavoro
Distance de commutation
Distancia de conmutación
触发感应距离
8025386.1HT1/2023/06/16/de
1
6 %
300 400 500
(11.81) (15.75) (19.69)
Distance in mm (inch)
400 450
400 500
(15.75) (19.69)
B
0 ... 40 m
Operating reserve
100
10
1
0 10 20
(32.80) (65.62)
Recommended sensing range for
the best performance
0
0 10 20
(32.80) (65.62)
D
C
A
A = Sensing range min. in m
B = Sensing range max. in m
C = Viewing range
D = Adjustable switching threshold
Recommended sensing range for the best performance
5 Troubleshooting
Störungsbehebung
Eliminazione difetti
Élimination des défauts
en
LED/fault pattern Cause
Green LED does not light up or No voltage or voltage below
flickers the limit values
Yellow LED lights up, no object GTx6L:
in the path of the beam Distance between the sensor
and the background is too
short
Yellow LED does not light up, GTx6L:
an object is in the beam path Object too small. /
Remission capability of the
object is insufficient /
Distance between the sensor
and the object is too long or
sensing range is set too short
Yellow LED does not light up, GL6L:
no object in the path of the Distance between sensor
beam and reflector is too large /
light beam is not completely
aligned to the reflector /
reflector is not suitable
GSE6L:
Distance between sender
and receiver is too large: /
Sender and receiver not
aligned correctly.
30 40
(98.43) (131.23)
Distance in m (feet)
30 40
30 40
(98.43) (131.23)
Distance in m (feet)
B
Resolución de problemas
故障排除
Measures
Check the power supply,
check all electrical connec‐
tions (cables and plug con‐
nections)
Reduce the sensing range
- /
- /
Increase the sensing range
Check alignment
GL6L, GSE6L, GTB6L, GTE6L | SICK 5