Short/Long Messages; Gps Report - Kenwood TK-5720 Manual De Instrucciones

■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status mode (proceed to
step 5) or Selcall + Status to enter Selcall mode (proceed to step 3).
3 Press /
• If Manual Dialing is enabled, you can enter a station ID by using the microphone
.
keypad
4 Press to enter Status mode.
5 Press /
• If Manual Dialing is enabled, you can enter a status ID by using the microphone
keypad.
6 Press the microphone PTT switch or
• "<<COMPLETE>>" appears on the display when the status has been
successfully transmitted.
■ Receiving
The icon will fl ash and a calling ID or text message will appear when a
Status call is received. Press any key to return to normal operation.
■ Reviewing Messages in the Stack Memory
1 Press the key programmed as Stack, or press and hold the key
programmed as Selcall, Status, or Selcall + Status to enter Stack mode.
• The last received message is displayed.
2 Press /
• Message types are identifi ed as follows:
I: Caller ID, S: Status Message, M: Short Message
• Press and hold
ID Name > Status/Short Message > Channel > Time Stamp
3 Press to return to normal operation.
• To delete the selected message, press
or
• To delete all messages, press and hold
deletion, press

SHORT/LONG MESSAGES

Received short messages are displayed the same as Status messages and are
stored in the same stack memory.
To send short messages, and to send and receive long messages, you must
connect the transceiver to a PC. Ask your dealer for details.

GPS REPORT

To send your location data, you must fi rst connect a GPS unit to the transceiver.
Once connected, press the key programmed as Send the GPS data, or access the
Menu {page 9}. If set up by your dealer, GPS data may be automatically transmitted
at a preset time interval.
to select the station you want to call.
to select the status you want to transmit.
to select the desired message.
for 1 second to cycle the display information as follows:
.
or .
to initiate the call.
or #. To confi rm the deletion, press
or # for 1 second. To confi rm the
15