Publicidad
Idiomas disponibles
Idiomas disponibles
Sonesse 40 WireFree RTS Li-ion
2.4.6. Erasing the memory of the drive (factory default)
To reset the drive, press and hold the drive head programming
button until the motorised product briefly moves Up and Down
3 times.
All the settings are erased. Green LED blinks 5 timest then
orange LED is fixed on.
2.4.7. Temporary sleeping mode
Attention
The motorised product must be programmed.
͉
͉
The drive will not respond to any control points commands for
15 minutes.
1) Press and hold the drive head programming button until the
motorised product briefly moves Up and Down.
2) Briefly press the drive head programming button, the
motorised product briefly moves Up and Down twice.
"Sleeping mode" is activated, green LED blinks 5 times to
confirm, then orange LED blinks every second as long as the
drive is in the temporary sleeping mode.
3) To deactivate the "Sleeping mode", briefly press the drive
head programming button. The motorised product briefly
moves Up and Down, the control point commands are
enabled. Green LED blinks 5 times.
3. USE AND MAINTENANCE
3.1. MODE SELECTION: ROLLER OR TILTING MODE
The drives are designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of application.
͉
͉
The drive is set (by default) to work in Roller mode.
1) Move the motorised product away from the end limits.
2) Simultaneously press and hold the UP and DOWN buttons
until the motorised product briefly moves Up and Down.
3) Press and hold the MY and DOWN buttons simultaneously
until the motorised product briefly moves Up and Down to
change from Roller mode to Tilting mode. Green LED blinks
twice to indicate that the drive is in Roller mode or three
times to indicate that the drive is in Tilting mode.
3.2. CONTROLLING UP, DOWN, MY: IN ROLLER
MODE
1) To move the motorised product from a limit to the other
limit, briefly press the UP or DOWN button.
2) To stop the motorised product, briefly press the MY button.
3) (If a my position is recorded) To move the motorised product
to the my position, briefly press the MY button.
Copyright
©
2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
1
2
3
1
2
3
1
2
3
EN
3x
2x
7
Publicidad
