Connecting Pellenc Batteries; Alpha 260 / 520 Batteries; Ulib 750 / 1200 / 1500 Batteries With Counterweight - pellenc EXCELION ALPHA Manual De Instrucciones

4.4. CONNECTING PELLENC BATTERIES

Important
Always check the remaining battery-life before use. If necessary, recharge the battery using the charger.
To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving
the connectors in contact with abrasive or dirty surfaces, or subjecting them to major impacts (falls).
For more information on PELLENC batteries see the battery instructions.
Note
When the battery is connected to the tool, the information appears on the tool's handle digital display and
disappears from the battery's digital display.

4.4.1. ALPHA 260 / 520 BATTERIES

Connecting the battery to the tool:
1. Position the battery with the digital display of the bat-
tery facing up.
2. Push in the battery until the locking clip engages and
the safety lock is closed.

4.4.2. ULIB 750 / 1200 / 1500 BATTERIES WITH COUNTERWEIGHT

Attaching the counterweight to the tool:
1. Push in the counterweight until the locking clip en-
gages and the safety lock is closed.
56
GRASS STRIMMER EXCELION ALPHA
53_144013_C