pellenc EXCELION ALPHA Manual De Instrucciones página 66

5.4.2. SPEED SELECTION
Low speed: speed 1
• Press once on the tool On / Off button.
• 1 LED lights up.
Medium speed = speed 2
• Press twice on the tool On / Off button.
• 2 LEDs light up.
High speed = speed 3
• Press three times on the tool On / Off button.
• 3 LEDs light up.
Caution
Flashing "°C" message on the handle display when the tool temperature approaches the safety
shutdown temperature. Reduce the speed to a minimum or take a break.
5.5. START-UP
Caution
Check that the safety devices are running properly before starting work.
Before starting work, check that:
• The grass strimmer is securely attached to the harness.
• The tool is properly balanced on the harness.
• The harness is correctly adjusted in height.
• The cutting head is not in direct contact with the ground.
• The work area is clear.
• Nobody else is within 15 metres.
• The battery is properly connected.
• The battery charge level is displayed.
• The selected speed is correct.
Note
When the battery is connected to the tool, the information appears on the tool's handle digital display and
disappears from the battery's digital display.
66
GRASS STRIMMER EXCELION ALPHA
53_144013_C