Sony KE-32TS2 Manual De Instrucciones página 11

Connecting a Satellite Receiver
Downloaded from: https://www.usersmanualguide.com/
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's SATELLITE
IN jack.
2
Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
3
Connect the supplied 75-ohm coaxial cable from your cable or antenna to the
TV's VHF/UHF jack.
Rear of TV
VIDEO IN 1
R AUDIO L VIDEO
VIDEO IN 2
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
Tip
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead
of the S VIDEO cable.
VIDEO IN 3 AUDIO OUT
S VIDEO R
R AUDIO L DVI-HDTV
R AUDIO L Y/G P /B P /R HD
B R
VIDEO IN 4
S VIDEO
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)
Installing and Connecting the TV
VHF/UHF
L
AC IN
CONTROL
IN
S
VD
OUT
SUB
WOOFER
Satellite receiver
Satellite
antenna
cable
75-ohm
coaxial
cable
(supplied)
US
11
(US)