Velleman CTC1000 Manual Del Usuario página 19

The control panel then displays the unused defense zones (up to 30).
5. Use the arrow keys to select the zone number to which you want to assign the device and press OK.
The procedure will now vary depending on the type of device you want to add.
6. Select Stop and press OK key to save your settings and return to the previous menu.
Notes
• If you are trying to add a sensor that has already been added, an error message will appear.
• To add this device anyway, you will need to remove it first (see section 9.5 Remove a device).
• Pressing the key
Depending on the type of device you want to add, different screens will then be displayed accordingly for
•
further configuration purpose.
To add a door contact
1. Use the up and down arrows to select a working mode and press OK.
For details about the available working modes, see section 9.3.
2. Provide a zone name.
If you do not want to use a name, leave this field blank.
3. Press OK to confirm installation.
V. 04 – 11/02/2016
cancels the procedure.
CTC1000
19 ©Velleman nv