Safe Transport And Storage; Introduction; Technical Specifications - Jacto PJM-20 Manual Del Operador

1.6. Safe transport and storage

CAUTION!
• During transport in vehicles, the sprayer must be off and secured. Always keep the shutoff valve
closed during transport and when the sprayer is not being used.
• Do not transport the sprayer next to foods, drinks, medications, animal feed, animals or people
without protective equipment;
• Store the sprayer in well-ventilated and safe areas. Do not store the sprayer with agrochemicals in the
tank. Agrochemicals may cause different reactions and damage the sprayer components if stored in the sprayer
when it is not being used. They may also endanger the health of the operator. Store the sprayer in dry, protected
and covered areas especially in areas of severe winters;
Disposal
Used sprayers must be disposed of in proper ad approved locations to receive these types of material. In case there is not a proper
location near you, please contact JACTO CUSTOMER SERVICE: Rua Doutor Luiz Miranda, 1650 CEP 17580-000, in the city of Pompeia,
SP - Phone: (55 14) 3405-2113 - or 0800-151811 (free call) – email: assistencia.tecnicajsfs@jacto.com.br – Business hours: Monday
through Friday 7 to 11:30 AM and 1 to 5:18 PM.

2. Introduction

This manual contains all the necessary information to assemble and operate the sprayer. Read it carefully and follow closely all the
instructions.
This sprayer was designed to spray plant protection products approved by regulatory authorities for knapsack sprayer use. Do not use
this sprayer for any other purpose other than the one mentioned.
NOTE: Keep this manual in a safe and easily accessible place for future reference.

3. Technical Specifications

Model
Maximum dimensions (W x L x H)
Net weight
Gross weight (empty)
Lance length
Hose length
Nozzle installed
Tank material
Tank
Capacity
Filler neck diameter
Pump
Type
Maximum working pressure
Pressure adjustment system
Open flow rate
Drive system
Suction capacity
PJM-25
415 mm x 430 mm x 655 mm
10.5 kg
12.9 kg
853 mm
1600 mm
Cone nozzle ATR 2.0 yellow
PEAD
20 L
150mm
Piston
360 psi (25 bar)
Relief valve
6 l/min
Automatic centrifugal clutch
6 L/min (to 7.000 rpm)
Engine
Type
Displacement
Diameter × Stroke
Engine useful power
(according to SAE J1349*)
Engine maximum torque
(according to SAE J1349*)
Cooling system
Ignition system
Fuel tank capacity
Oil capacity
Spark plug
4 strokes, camshaft single,
cylinder
25.0 cm3
35.0×26.0 mm
0.72 kW (1.0 HP)/7.000 rpm
1.0 N·m (0.10 kgf·m)
/5,000 rpm
Forced air circulation
Magneto-transistor
0.53 L
0.08 L
NGK: CMR4H
93/127