Descargar Imprimir esta página

BTI PROFILINE -KS 24 V Instrucciones De Servicio página 37

Publicidad

Idiomas disponibles

Idiomas disponibles

Service
BTI Befestigungstechnik GmbH & Co. KG
Postfach 40
74665 Ingelfingen
Salzstraße 51
74653 Ingelfingen-Criesbach
Telefon:
..........................................................
Telefax:
.......................................................
Internet:
.................................................................
General Safety Rules
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless) pow-
er tool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents. EN 50 144
(Battery powered products) and EN 60 335 (Bat-
tery charger) according to the provisions of the di-
rectives 73/23/EEC, 89/336/EEC, 98/37/EC.
0 79 40/141-0
ppa. U. Delz
0 79 40/141-64
www.bti.de
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
Subject to change without notice
2) Electrical safety
a) Power tool plugs must match the outlet. Never
b) Avoid body contact with earthed or grounded
c) Do not expose power tools to rain or wet condi-
d) Do not abuse the cord. Never use the cord for
e) When operating a power tool outdoors, use an
English - 7
Declaration of Conformity
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
tions. Water entering a power tool will increase the
risk of electric shock.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
i.V. G. Hub

Publicidad

loading