Publicidad
• the isolating switch will be easily accessible to the customer with the hob
installed.
• you consult local building authorities and by-laws if in doubt regarding
installation.
• you use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the
wall surfaces surrounding the hob.
When you have installed the hob, make sure that
• the power supply cable is not accessible through cupboard doors or drawers.
• there is adequate flow of fresh air from outside the cabinetry to the base of the
hob.
• if the hob is installed above a drawer or cupboard space, a thermal protection
barrier is installed below the base of the hob.
• the isolating switch is easily accessible by the customer.
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
Adjusting the bracket position
Fix the hob on the work surface by screw 4 brackets on the bottom of hob(see
picture) after installation.
Cautions
1. The induction hotplate must be installed by qualified personnel or technicians.
We have professionals at your service. Please never conduct the operation by
yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the hob
electronics.
EN-30
Publicidad
