Publicidad
Idiomas disponibles
Idiomas disponibles
3.3.1 ANAL CLEANING WITH AUXILIARY SIDE CONTROL
The position of the nozzle is established beforehand; so is the water
temperature. This auxiliary side control allows the use with medium settings:
•
•
•
With the function activated, by pressing the same button again the oscillating
function is activated. If it is pressed again, it returns to the normal mode (not
oscillating).
To stop this function, press the Stop button on the auxiliary side control or
on the remote control.
The cleaning stops after 2 minutes if no other button is pressed.
If the drying button is pressed while the anal cleaning is taking place, the
cleaning stops and the drying is activated.
3.3.2 DRYING WITH AUXILIARY SIDE CONTROL
The temperature and pressure settings of the dryer function are preset to the
medium level if activated through the auxiliary side control.
To stop this function press the Stop button on the remote control or the
auxiliary side control. If no other button is pressed the drying stops after 5
minutes.
3.3.3 STOP WITH THE AUXILIARY SIDE CONTROL
It stops any activated function.
Medium temperature
Medium pressure
Middle position
39
Publicidad
