Publicidad
Idiomas disponibles
Idiomas disponibles
MODE 4: SCHEDULED:
This mode allows to schedule the activation and deactivation of the e-bidet lights, by days of
the week and at personalized time slots.
This mode is only possible to be set by the APP. If mode 4 is selected via the auxiliary side
control, and no automatic activation or deactivation range has been programmed through the
APP, it will act the same as Mode 5 the e-bidet will act the same as in mode 5.
MODE 5 SWITCHED OFF:
Lights always switched off.
The
Light
mode
1
5 s.
1.
Press the Dryer button on the auxiliary side control for 3 seconds.
2.
A numbered of beeps will be heard and the lights will blink indicating the mode of the
In-Wash Insignia:
•
Mode 1: 1 blink + 1 beep
•
Mode 2: 2 blinks + 2 beeps
•
Mode 3: 3 blinks + 3 beeps
•
Mode 4: 4 blinks + 4 beeps
•
Mode 5: 5 blinks + 5 beeps
3.
Press successively the Dryer button to change to the next mode, until you reach the
desired mode. The lights blink 1, 2, 3, 4 or 5 times indicating the selected mode.
4.
Press the Stop button on the auxiliary side control or on the remote control, to memorise
the option, or wait one minute and the last selected mode will be registered
3.4.3 SILENCE MODE
The In-Wash Insignia offers the option of silencing
the sound it emits when activating the functions
and settings.
To silence it, simultaneously for 3 seconds the
Drying and Stop buttons.
To return to the previous state, repeat the action.
may
be
modified
2
4
by
means
of
the
3
ó
42
auxiliary
side
control:
3 s.
Publicidad
