Publicidad
Idiomas disponibles
Idiomas disponibles
3.3.4 AUXILIARY SIDE CONTROL FLUSHING
In case of power supply failure, or in case that the remote control runs out of
batteries, it is possible to make a full flush of the deposit, using the button on
the auxiliary side control.
3.3.5 HYGIENIC FLUSH
The hygienic flush can be performed by side control. It performs a 4.5L flush
with cleaning agent.
3.3.6. HEATED SEAT TEMPERATURE ADJUSTMENT
This function allows you to activate the heated seat function and adjust its
temperature.
To activate the function, you must press the "heated seat" button on the
auxiliary side panel. After a short "beep" is emitted, the heated seat will be
activated at temperature level 1.
•
•
•
After a few seconds without pressing the button, the device exits the
temperature setting mode and the last level selected is programmed.
•
▌
3.4 CHANGE IN THE PRE-SET SETTINGS
Some of the presset values can be adjusted by the remote and side control.
All the setting can be more easily adjusted using the App.
If the button is then pressed again, two short beeps will be heard and the
temperature will rise to level 2.
If the button is pressed a third time, you will hear three short beeps and
the temperature level will rise to level 3.
If the button is pressed a fourth time, a long beep will be heard and the
heated seat will return to stand-by mode.
If the button is pressed for 3 seconds from any level, a long beep will be
heard and the heated seat will return to standby mode.
40
Publicidad
