Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
The pump can be mounted directly on 185 kg (400 lb) drums. However, it is strongly recommended the use of a lifter/RAM and a coupled plate.
Example: mounting with cover (418026+360133 / 418004) for 185 kg
(400 lb) drum. Insert the pump through the cover and fix it with included
2" bung adapter. Insert the pump into the drum and fasten the cover onto
the drum firmly (see figure 2). For heavy greases, the use of a follower
plate is recommended (417017/417018).
It is also possible to install the pump in tanks/containers equipped with a
3" female camlock connection, using our 3" camlock adapter kit
(534900), usually in horizontal/inclined position.
Fig. 1
Samson Corporation • One Samson Way • N.C. 28778 Swannanoa USA • Phone (828) 686-8511 • Fax (828) 686-8533
3" FEMALE CAMLOCK
3" MALE CAMLOCK
It is recommended to do this assembly
with the short versions of the pump:
531030 / 531031.
OPTIONAL GROUNDING:
Securely attach the clamp of
supplied cable to a ground
element of the installation
OPTIONAL GROUNDING:
Ensure the grounding cable is
securely fastened to the pump
body
Fig. 2
EN
EN
418026+360133 /
418004
3
R. 07/23 853 868
Publicidad
