Publicidad
Idiomas disponibles
Idiomas disponibles
TOOL SPECIFICATIONS
All dimensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The BTFP71917 requires 2.0 cubic feet per minute or C.F.M. (56.6 liters per minute or LT/MIN) of free air at 80PSI (5.6 kg/cm
operate at a rate of 60 fasteners per minute. To determine the appropriately sized air compressor, take the actual rate at which the tool will
be run and compare the required C.F.M. (LT/MIN) to the compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools C.F.M. required to operate the tool at
the rate of 60 fasteners per minute. In this case, be sure that your air compressor can deliver a minimum of 1.0 C.F.M. (28.3 LT/MIN) at
80 PSI(5.6 kg/cm
) for optimum performance.
2
FASTENER SPECIFICATIONS
Tool Model
BTFP71917
* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve maximum perfomance when
used with precision BOSTITICH fasteners engineered to the same exacting standards. BOSTITCH cannot assume responsibility
for product performance if our tools are used with fasteners or accessories not meeting the specific requirements
established for genuine BOSTITCH fasteners and accessories.
70-120 PSI (4.9 to 8.43kg/cm
1-1/4" to 2-1/2" (32mm - 63mm)
). Select the operating pressure within in this range for best fastener performance.
2
Fastener Type
Fastener SKU
SB16-1.25
SB16-1.50
SB16-1.75
SB16-2.00
Straight Finish
Nails
SB16-2.50
BTFP71917
16 GA Finish Nailer
Oil-Free
)
2
120 PSI (8.43 kg/cm
)
2
SB16 Series
16 Gauge
100
12-1/2" (316.6mm)
3-1/3" (84.1mm)
11-5/16" (288.5mm)
4.6 lbs (2.1kg)
Crown Width
N/A
N/A
N/A
N/A
N/A
-6-
) to
2
).
2
Gauge
Length
16
1-1/4" (32mm)
16
1-1/2" (38mm)
16
1-3/4" (45mm)
16
2" (50mm)
16
2-1/2" (63mm)
Publicidad
