Maintenance - Optika Italy LAB 10 Manual De Instrucciones

5.0 MAInTenAnCe

5.1 Always think about
- The following environment is required: Indoor temperature: 0-40°C, Maximum relative humid-
ity: 8 % (non condensing)
- Keep the microscope away from dust and shocks while in use.
- Turn off the light immediately after use.
- use a soft lens tissue or compressed air to clean the optics after use.
- Only if needed, use a cloth moistened with water and a mild detergent, rinsing with water and
drying immediately with a lint-free cloth.
- After use, cover the microscope with the included dust-cover, and keep it in a dry and clean
place.
5.2 do not!
- Wipe the surface of any optical items with your hands. Fingerprints can damage the optics.
- use solvents, neither on the microscope, nor on the optics.
- Disassemble objective or eyepieces to attempt to clean them.
- Mishandle or impose unnecessary force on the microscope.
- Clean the unit with volatile solvents or abrasive cleaners.
- Attempt to service the microscope yourself.
5.3 How to change the fuse
In case of malfunctioning of the illumination, replace the fuse on the bottom of the stand:
unscrew the old fuse and replace it with a new fuse with the same specifications.
Page 8