Maytag HY-1 Manual Del Usuario página 4

Using the Controls
STEP 1
Select Temperature
In order to select the correct temperature, turn the
temperature control to one of four choices; Regular,
Medium, Delicate or Air Fluff.
DRYER TEMPS
Regular Sturdy cottons or labels marked
Tumble Dry.
Medium For wrinkle free/permanent press
synthetics, lightweight cottons
labeled Tumble Dry Medium.
Delicate For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Air Fluff Items which need freshening.
Load tumbles with room
temperature air.
STEP 2
Select Options
Extended Tumble
Extended Tumble is provided to minimize wrinkles in
the Auto Dry Permanent Press cycle. This feature
provides an extra 60 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this portion of the cycle.
End of Cycle Chime
When the cycle is complete, a chime will sound. On
select models, the End of Cycle Chime can be turned
OFF.
Remove load immediately to reduce wrinkling.
3
LOAD TYPE
(select models)
STEP 3
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry cycle, the control dial
should point between More Dry and Less Dry for most
loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Auto Dry Regular
The Auto Dry Regular cycle is designed to dry most
cottons and linens. At the end of the cycle, the clothes
are cooled to reduce wrinkling for approximately
10 minutes.
Auto Dry Permanent Press
The Auto Dry Permanent Press cycle is designed to dry
wrinkle free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically. At the end of
the cycle, the clothes are cooled for approximately 20
minutes to reduce wrinkling. If the load is not removed
from the dryer, the cycle will advance to Extended
Tumble which provides additional unheated tumbling
time. (See Step 2).