Dräger Flame 3000 Instrucciones De Uso página 5

1 For your safety
1.1 General safety statements
● Before using this product, carefully read the instructions for use.
● Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions.
● Use the product only for the purposes specified in the Intended Use section
of this document.
● Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
● Only fully trained and competent users are permitted to use this product.
● Comply with all local and national rules and regulations associated with this
product.
● Only trained and competent personnel are permitted to inspect, repair, and
service the product.
● It is recommended that all repairs are carried out by Dräger.
● Do not use a faulty or incomplete product, and do not modify the product.
● Notify Dräger in the event of any component fault or failure.
● This product is approved according to ATEX directive 2014/34/EU. It must
only be used under the conditions specified in the approval certificate.
1.2 Special and product-specific safety
statements
● This product is approved according to ATEX directive 2014/34/EU. It must
only be used under the conditions specified in the approval certificate.
● Ensure that all site permits, procedures and practices are followed when
installing, using and maintaining the product.
1.3 Meaning of the warning notices
The following warning notices are used in this document to alert the user to
potential hazards. The meanings of the warning notices are defined as follows:
Instructions for use |
Dräger Flame 3000
Warning sign Signal word
WARNING
CAUTION
NOTICE
2 Description
2.1 Product overview
The Dräger Flame 3000 is a visual flame detector. It uses an imaging device,
digital signal processing hardware and firmware algorithms to interpret the
visual characteristics of flame. It is capable of operating independently; external
control equipment is not required for normal functions. The Dräger Flame 3000
can be integrated into Dräger and third party control systems.
For your safety
Classification of the warning notice
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
death or serious injury.
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
physical injury. It may also be used to
alert against unsafe practices.
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
damage to the product or environment.
| en
5