Care And Maintenance - Vision Fitness T80 Manual Del Propietário

CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged or has worn or
broken parts. Use only replacement parts supplied by Vision
Fitness.
MAINTAIN LABELS AND NAMEPLATES Do not remove
labels for any reason. They contain important information. If
unreadable or missing, contact Vision Fitness for a replacement
or an authorized service provider.
MAINTAIN ALL EQUIPMENT Preventative maintenance is
the key to smooth operating equipment, as well as keeping the
user's liability to a minimum. Equipment needs to be inspected
at regular intervals. Defective components must be replaced
immediately. Improperly working equipment must be kept out
of use until it is repaired. Ensure that any person(s) making
adjustments or performing maintenance or repair of any kind
is qualified to do so. Vision Fitness will provide service and
maintenance training at our corporate facility upon request or in
the field if proper arrangements are made.

CARE AND MAINTENANCE

HOW DO I CLEAN MY MACHINE?
Clean with soap and water cleaners only. Never use solvents
on plastic parts. Cleanliness of your treadmill and its operating
environment will keep maintenance problems and service calls to
a minimum. For this reason, Customer Tech Support recommends
that the following preventive maintenance schedule be followed.
DAILY
• Clean entire machine using water and mild detergent such as
"Simple Green", or other Vision approved solution (cleaning
agents should be alcohol and ammonia free).
19